Putting Report Services inside DotNetNuke 3.1+

Hi All,
we are building a portal that will include RS inside DNN3.1+. I see we
can just include the address in the IFRAM control but we then need
something to control parameters etc...we read the article below to find
this out...
What we are looking for is to have good control over things like
parameter selection and placement of paramters on the page...we have
cascading dependent prompts and we want the related prompts on the same
line etc...we are told we cannot do this in just the standard web
interface....
So we are looking around for people who have done DNN 3.1+ and RS..
We also posted to DNN forums and have had one hopeful answer so
far..but we thought we would ask around!!
Thanks in Advance
Peter Nolan
http://msdn.microsoft.com/sql/default.aspx?pull=/msdnmag/issues/04/08/sqlserverreportingservices/default.aspxHave you looked at the modules at www.snowcovered.com ? I also found this
one..
http://dnndev.icpconline.com/DotNetNuke/Default.aspx?tabid=54
"Peter Nolan" wrote:
> Hi All,
> we are building a portal that will include RS inside DNN3.1+. I see we
> can just include the address in the IFRAM control but we then need
> something to control parameters etc...we read the article below to find
> this out...
> What we are looking for is to have good control over things like
> parameter selection and placement of paramters on the page...we have
> cascading dependent prompts and we want the related prompts on the same
> line etc...we are told we cannot do this in just the standard web
> interface....
> So we are looking around for people who have done DNN 3.1+ and RS..
> We also posted to DNN forums and have had one hopeful answer so
> far..but we thought we would ask around!!
> Thanks in Advance
> Peter Nolan
> http://msdn.microsoft.com/sql/default.aspx?pull=/msdnmag/issues/04/08/sqlserverreportingservices/default.aspx
>|||Hi Shoeman,
I searched snowcovered for 'report services' but didn't find
anything....should I?
Also, thanks for the pointer to the other site...I've registered and
I'll download it asap...looks like it might be something like what I
am looking for....
Though I am told that it is possible to integrate better charts from
Dundas even in the 2000 release....and it does not look like this site
does that yet....but we are learning... :-)
Thanks again
Peter
www.peternolan.com|||Hi,
look at the WebHarpoon module:
http://www.nukesmith.com/
Walter Haas
Peter Nolan wrote:
> Hi All,
> we are building a portal that will include RS inside DNN3.1+. I see we
> can just include the address in the IFRAM control but we then need
> something to control parameters etc...we read the article below to find
> this out...
> What we are looking for is to have good control over things like
> parameter selection and placement of paramters on the page...we have
> cascading dependent prompts and we want the related prompts on the same
> line etc...we are told we cannot do this in just the standard web
> interface....
> So we are looking around for people who have done DNN 3.1+ and RS..
> We also posted to DNN forums and have had one hopeful answer so
> far..but we thought we would ask around!!
> Thanks in Advance
> Peter Nolan
> http://msdn.microsoft.com/sql/default.aspx?pull=/msdnmag/issues/04/08/sqlserverreportingservices/default.aspx|||Hi Walter,
thanks for the pointer to webharpoon...I did see it earlier but I am
not sure how it might help me so much with report services....from my
reading of the functionality it will help me get content from report
services but it looks like it will just pull back RS reports rather
like an iframe.....of course, being a newbie in this area I might be
misunderstanding....
Is it able to do more with RS than just bring back the report content
similar to an iframe?
Thanks
Peter

Publish Reports Server to Internet

Hi all,
I have an external IP for my server and I tried to connect it from out side,
I notice that the link address appear on Status bar is my localhost's name
link ... and that's why it can be accessed to view reports. It just work if I
re-config my IP setting following external IP. Who can expalin me or show me
some addresses to study more about this problem ?
--
Thnx lots,
NgocYour local machine has its IP address and the server has its IP address
accessible from the Internet? Assuming you have configured security so that
the server is accessible from outside, you just need to do
http://<serverIPaddress>/Reports or https://<serverIPaddress>/Reports, right?
If you are doing http://<yourmachine>/Reports, then you will see the local
report server, unless you have used rsconfig.exe to point your local server
to the external server URL. Books Online has details on using rsconfig.exe.
Charles Kangai, MCDBA, MCT
"Phi Ngoc" wrote:
> Hi all,
> I have an external IP for my server and I tried to connect it from out side,
> I notice that the link address appear on Status bar is my localhost's name
> link ... and that's why it can be accessed to view reports. It just work if I
> re-config my IP setting following external IP. Who can expalin me or show me
> some addresses to study more about this problem ?
> --
> Thnx lots,
> Ngoc|||I am having the same problem where I go here http://(fqdn.external.name)
/Reports
The reports are viewable externally, but if I try to export them it reverts
to the computer name (Which happens to be MISERY) like this
http://misery/Reports/Pages/Reports.aspx..etc.etc
Does anyone know how to change this?
Thanks.
--
Message posted via http://www.sqlmonster.com|||Open the RSWebApplication.config file and check the URL inside the
<ReportServerURL> element. Do the same with RSReportServer.config file. The
files are located in the folders <SQL Server Installation>\Reporting
Services\ReportManager and <SQL Server Installation>\Reporting
Services\ReportServer, respectively.
Charles Kangai, MCDBA, MCT
"David Benedict via SQLMonster.com" wrote:
> I am having the same problem where I go here http://(fqdn.external.name)
> /Reports
> The reports are viewable externally, but if I try to export them it reverts
> to the computer name (Which happens to be MISERY) like this
> http://misery/Reports/Pages/Reports.aspx..etc.etc
> Does anyone know how to change this?
> Thanks.
> --
> Message posted via http://www.sqlmonster.com
>